UJP - 技術情報2 編集 : MacOSX/HigiSierra/snmpd の編集

# u0726cb5 の編集

ページ内容:

****snmpd.confファイルを確認する [#u0726cb5]

ここまでで設定されたsnmpd.confファイルを確認する．

$ cat /usr/share/snmp/snmpd.conf🆑
 ###########################################################################
 #
 # snmpd.conf
 #
 #   - created by the snmpconf configuration program
 #
 
 
 
 ###########################################################################
 # SECTION: Monitor Various Aspects of the Running Host
 #
 #   The following check up on various aspects of a host.
 
 # proc: Check for processes that should be running.
 #     proc NAME [MAX=0] [MIN=0]
 #
 #     NAME:  the name of the process to check for.  It must match
 #            exactly (ie, http will not find httpd processes).
 #     MAX:   the maximum number allowed to be running.  Defaults to 0.
 #     MIN:   the minimum number to be running.  Defaults to 0.
 #
 #   The results are reported in the prTable section of the UCD-SNMP-MIB tree
 #   Special Case:  When the min and max numbers are both 0, it assumes
 #   you want a max of infinity and a min of 1.
 
 proc  smbd🈁
 
 # disk: Check for disk space usage of a partition.
 #   The agent can check the amount of available disk space, and make
 #   sure it is above a set limit.
 #
 #    disk PATH [MIN=100000]
 #
 #    PATH:  mount path to the disk in question.
 #    MIN:   Disks with space below this value will have the Mib's errorFlag set.
 #           Can be a raw integer value (units of kB) or a percentage followed by the %
 #           symbol.  Default value = 100000.
 #
 #   The results are reported in the dskTable section of the UCD-SNMP-MIB tree
 
 disk  /Volumes/RAID0_12TB 95%🈁
 
 # load: Check for unreasonable load average values.
 #   Watch the load average levels on the machine.
 #
 #    load [1MAX=12.0] [5MAX=12.0] [15MAX=12.0]
 #
 #    1MAX:   If the 1 minute load average is above this limit at query
 #            time, the errorFlag will be set.
 #    5MAX:   Similar, but for 5 min average.
 #    15MAX:  Similar, but for 15 min average.
 #
 #   The results are reported in the laTable section of the UCD-SNMP-MIB tree
 
 load  12 8 4🈁
 
 # file: Check on the size of a file.
 #   Display a files size statistics.
 #   If it grows to be too large, report an error about it.
 #
 #    file /path/to/file [maxsize_in_kilobytes]
 #
 #      if maxsize is not specified, assume only size reporting is needed.
 #
 #   The results are reported in the fileTable section of the UCD-SNMP-MIB tree
 
 file  /var/log/system.log 30000🈁
 
 
 
 
 
 
 ###########################################################################
 # SECTION: System Information Setup
 #
 #   This section defines some of the information reported in
 #   the "system" mib group in the mibII tree.
 
 # syslocation: The [typically physical] location of the system.
 #   Note that setting this value here means that when trying to
 #   perform an snmp SET operation to the sysLocation.0 variable will make
 #   the agent return the "notWritable" error code.  IE, including
 #   this token in the snmpd.conf file will disable write access to
 #   the variable.
 #   arguments:  location_string
 
 syslocation  BCP🈁
 
 # syscontact: The contact information for the administrator
 #   Note that setting this value here means that when trying to
 #   perform an snmp SET operation to the sysContact.0 variable will make
 #   the agent return the "notWritable" error code.  IE, including
 #   this token in the snmpd.conf file will disable write access to
 #   the variable.
 #   arguments:  contact_string
 
 syscontact  管理者メールアドレス
 
 # sysservices: The proper value for the sysServices object.
 #   arguments:  sysservices_number
 
 sysservices 76🈁
 
 
 
 
 
 
 
 
 
 $

コメントとかが多い．．．
　シンプルに書き直す．

$ cat /usr/share/snmp/snmpd.conf🆑
 syslocation  BCP
 syscontact  管理者メールアドレス
 sysservices 76
 
 proc  smbd
 disk  /Volumes/RAID0_12TB 95%
 disk  /Volumes/zeusHD 80%
 load  12 8 4
 file  /var/log/system.log 30000
 
 $

たくさん書いてきたけれど，これだけ．

編集の要約:

Q & A 認証: ページ更新時は次の質問にお答えください。(プレビュー時は必要ありません)
Q: 日本の首都は？(漢字で)
A:

お名前: タイムスタンプを変更しない